หน้าเว็บ

วันจันทร์ที่ 28 พฤษภาคม พ.ศ. 2555

Configure SAP Auto Import Transport in Queue


Configure SAP Auto Import

1. Log on to the system that you want to configure auto import. Go to Transport Route. Switch to the change mode. Position the cursor on the SAP System for which you want to choose a transport strategy. Then, go to Edit > System > Change.

SAP :: Maintain Operation Modes and Instances

ตั่งค่าจำนวน Background Job , RFC, DIA แบ่งตามช่วงเวลาแยกตาม Server


TC :: RZ04

วันพฤหัสบดีที่ 24 พฤษภาคม พ.ศ. 2555

วันอังคารที่ 15 พฤษภาคม พ.ศ. 2555

IPsec เจ้าปัญหา เข้าวินโดวได้ เน็ตเวิร์ดแอ็กทีพ สวิตไม่พัง แต่ปิงไม่เจอ

เมื่อเจอปัญหาแบบนี้ ลองเข้าไปดู Service ที่ชื่อ IPsec ถ้ามันไม่สตาทสงสัยเจ้าตัวนี้ไว้ได้เลย
เพราะปกติมันจะสตาท Auto แล้วเมื่อมันไม่สตาทมันจะกระทำการดังต่อไปนี้

The IPSec driver has entered Block mode. IPSec will discard all inbound and outbound TCP/IP network traffic that is not permitted by boot-time IPSec Policy exemptions. *0*

วันพฤหัสบดีที่ 10 พฤษภาคม พ.ศ. 2555

How to disable the CIM agent on the ESX/ESXi host


To disable the CIM agent on an ESX host:
  1. Log in to the ESX host as root.
  2. Run these commands:service sfcbd stopchkconfig sfcbd-watchdog offchkconfig sfcbd off
    Note: Changing the chkconfig disables the sfcbd service and is persistent across reboots.
    To re-enable the CIM agent on the ESX host, run these commands:
     
service sfcbd start
chkconfig sfcbd-watchdog on
chkconfig sfcbd on
Note: To check the status of the agent on ESX, run the below command.

service sfcbd status



วันพุธที่ 2 พฤษภาคม พ.ศ. 2555

How to Change SAP Profile Parameter Online


วิธีการเปลี่ยนค่า SAP Profile Parameter Online ค่าเหล่านี้จะหายไปเมื่อรีสตาทเครื่อง
ในที่นี้จะยกตัวอย่างการตั่งค่า Maximum Work Process runtime
(เป็นค่าที่กำหนดระยะเวลาสูงสุดของ Process ที่ถูกสร้างจาก User ชนิด Diaglog)

1. TCODE :: RZ11 (Maintain Profile Parameters)
2. ใส่ ชื่อพารามิเตอร์ที่ต้องการลงในช่อง Param Name ในที่นี้คือ “rdisp/max_wprun_time”
3. เมื่อทำการ Display จะเห็นค่าที่ใช้งานอยู่ในปัจจุบัน และค่าใน Profile 
4. ให้ทำการแก้ไขโดยการกด Change
5. ให้ใส่ค่าที่ต้องการแล้วเลือก Switch on all Server เพื่อให้มีผลกับ Server ทุกตัวจากนั้นก็เซฟ เป็นอันเสร็จขึ้นตอน